PSL vertical bulb gaskets

Gimatech’s PSL vertical bulb gaskets are designed to ensure effective sealing between glass and sheet metal, without the use of adhesives. Composed of a reinforced “U” section with a metal core, these gaskets provide secure positioning on metal flanges or supports.

Available in various versions, such as 60/4, 90/36, 90/34 EPDM, 90/34, 90/35, and 20/99, these gaskets adapt to different dimensional and material requirements, offering versatile solutions for industrial applications.

All products supplied by Gimatech comply with REACH regulations and RoHS directives, ensuring the absence of hazardous substances and meeting the environmental and safety standards required in the European industrial sector.

60/4

Product image
60/4 1
60/4 2
60/4 3
60/4 4

90/34 EPDM

Product image
90/34 EPDM 1
90/34 EPDM 2
90/34 EPDM 3
90/34 EPDM 4

90/34

Product image
90/34 1
90/34 2
90/34 3
90/34 4

90/35

Product image
90/35 1
90/35 2
90/35 3
90/35 4

20/99

Product image
20/99 1
20/99 2
20/99 3
20/99 4

90/36

Product image
90/36 1
90/36 2
90/36 3
90/36 4

You might also be interested in…

PSL horizontal bulb gaskets

Show more

PSL flange gaskets

Show more

PSL seals and solid rubber U-shaped gaskets

Show more

Gaskets for portholes

Show more

Do you need something specific?

Contact us and we will find or design together the profile you are looking for.

    Dimensional references

    The dimensional scheme represents the following parameters:
    • [A] measurement in millimeters, referred to the maximum non-working height between the flange surface and the bulb apex
    • [B] measurement in millimeters, recommended flange thickness for gasket application
    • [C] measurement in millimeters, space occupied by the “U” shaped part
    The measurement [B] may be expressed by two digits; the first indicates the minimum thickness, and the second indicates the maximum thickness of the sheet metal used as the clamping flange. For normal gasket use, it is recommended to provide a gap between the frame and the door that is not less than 50% of the value indicated by parameter [A].
    The curvature scheme represents the various directions of curvature during application:
    • [D] curve “right or left”
    • [E] curve “door contour”
    • [F] curve “door opening”
    Accepted curves are intended for mounting on sheets with 90° angles and sharp edges.
    The images and data provided on this website are indicative and not binding. The images are property of GIMATECH srl and represent the products actually supplied. However, GIMATECH srl is not obliged to update the data and photos contained on this website.
    (easier to debug in console) (faster)